Popov Sergei M., Rybaltovsky Andrey, Bazakutsa Alexei, Smirnov Alexander, Ryakhovskiy Dmitry, Voloshin Viktor, Kolosovskii Alexander, Vorob’ev Igor, Isaev Viktor, Chamorovskiy Yuriy, Lipatov Denis, Butov Oleg V. High Efficient Random Laser with Cavity Based on the Erbium-Doped Germanophosphosilicate Artificial Rayleigh Fiber. Photonics , 2023 , 10 (7). р. 748. ISSN 2304-6732
|
Текст
photonics-10-00748-v2.pdf Загрузить (3MB) | Предварительный просмотр |
Аннотация
The Erbium “random” laser, based on the artificial Rayleigh fiber, has been comparatively studied in detail under two different pump conditions: 974.5 and 1485 nm pumping wavelengths. The artificial Rayleigh 7-m-long fiber was used as a laser cavity, it was formed by the ultraviolet (UV) inscription of the uniform array of the weakly reflective fiber Bragg grating (FBG) during the fiber drawing process. The UV photosensitivity of the Erbium-doped fiber originated from the specially developed (germanophosphosilicate) core glass composition. The emission spectrum of the fabricated “random” fiber laser had a single narrow peak at the 1548 nm wavelength. It was clearly revealed that the extension of the laser cavity by the separate wavelength-matched 90%-reflective FBG resulted in a significant laser efficiency growth. The highest laser slope efficiency of 33% and the laser output power of 80 mW were reached in the FBG-modified cavity at the 974.5-nm-wavelength pumping. The continuous-wave operation mode of this laser has been confirmed. The laser linewidth value measured by the delayed self-heterodyne technique was about 550 Hz.
| Тип объекта: | Статья |
|---|---|
| Авторы на русском. ОБЯЗАТЕЛЬНО ДЛЯ АНГЛОЯЗЫЧНЫХ ПУБЛИКАЦИЙ!: | Попов С.М., Рыбалтовский, Базакуца, Смирнов, Ряховский, Волошин, Колосовский, Воробьев, Исаев, Чаморовский, Липатов, Бутов |
| Подразделения (можно выбрать несколько, удерживая Ctrl): | 195 лаб. волоконно-оптических технологий 226 лаб. волоконных световодов и элементов на их основе |
| URI: | http://cplire.ru:8080/id/eprint/8341 |
 |
Изменить объект |
