Temiryazev A. G., Temiryazeva M. P. Some Methods for Improving the Quality of Magnetic Force Microscopy Images. Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques , 2023 , 17 (5). С. 1022-1027. ISSN 1027-4510
Полный текст не доступен из этого репозитория.Аннотация
Some factors affecting the quality of magnetic force microscopy images are considered. Main attention is paid to deterioration of the quality of scans caused by probe contamination. It is shown that contamination can occur both during scanning and during storage of the probe. These two different sources of contamination show up differently in images, and different methods must be used to eliminate them. A likely source of probe contamination is the gel used in probe storage and shipping boxes. The magnetic coating of cantilevers can be a catalyst for a chemical reaction leading to the formation of liquid hydrocarbons. Liquid contaminants act as probe functionalizers. When the probe is moved away from the surface, mechanical bonds can be maintained between them due to molecular chains adsorbed on the probe. Depending on the degree of contamination, the presence of such a bond can lead either to the appearance of stripes in the image of the magnetic structure or to the complete disappearance of magnetic contrast. A modification of the standard procedure for magnetic measurements, i.e., the introduction of an additional withdrawal into the two-pass technique (lift mode), makes it possible to completely eliminate the parasitic influence of this effect.
| Тип объекта: | Статья |
|---|---|
| Авторы на русском. ОБЯЗАТЕЛЬНО ДЛЯ АНГЛОЯЗЫЧНЫХ ПУБЛИКАЦИЙ!: | Темирязев А.Г., Темирязева М.П. |
| Подразделения (можно выбрать несколько, удерживая Ctrl): | 196 лаб. спин-волновых процессов в миллиметровом и субмиллиметровом диапазонах длин волн |
| URI: | http://cplire.ru:8080/id/eprint/9591 |
 |
Изменить объект |
