Synthesis and study of ultra-wideband planar three-mirror system.

Venetskiy A.S., Kaloshin V.A., Nguyen K.T., Frolova E.V. Synthesis and study of ultra-wideband planar three-mirror system. Journal of Radio Electronics , 2018 , 2018 (1). ISSN 16841719

Полный текст не доступен из этого репозитория.
Официальный URL: https://doi.org/10.30898/1684-1719-2018-1-5

Аннотация

Cylindrical mirror and mirror - lens systems are used as radiating systems for multibeam antenna arrays. In this case, the planar waveguide, in which the feed element is located, makes a 180-degree turn and forms a two-layer structure, the second floor of which is occupied by an array. Such a design is more compact than a one-story one, in which the Rotman lens is usually used as a focusing element. A two-mirror aplanatic system allows reducing aberrations and expanding the scanning sector in comparison with a single-mirror one, however, for the arrangement of the grating above the planar waveguide, one more rotation of the planar waveguide is required, i.e. a transition to a three-mirror system is necessary. This construction is considered in this paper. It is shown that the third mirror allows reducing aberrations in comparison with the two-mirror system. The work consists of two parts. In the first part, problems of synthesis and minimization of aberrations of a cylindrical three-mirror aplanatic system are considered. As a result of optimization of the parameters, the angle of view of 100 degrees is realized. In the second part, the scanning properties of a four-layer antenna based on a synthesized three-mirror system were studied. The results of the experiment confirmed the size of the scanning sector and the broadband properties of the multi-beam antenna based on a synthesized three-mirror system.

Тип объекта: Статья
Авторы на русском. ОБЯЗАТЕЛЬНО ДЛЯ АНГЛОЯЗЫЧНЫХ ПУБЛИКАЦИЙ!: Венецкий Калошин Фролова Нгуен
Подразделения (можно выбрать несколько, удерживая Ctrl): 113 лаб. электродинамики композиционных сред и структур
URI: http://cplire.ru:8080/id/eprint/4629
Только для зарегистрированных пользователей
Изменить объект Изменить объект